5G Signal Generation
Although no 5G standard has yet been defined, it is clear from the initial frequency bands under investigation (multiple different bands up to 40 GHz) and the bandwidths (up to 800 MHz) being used that 5G is going to present a significant technical challenge. Working at these microwave frequencies is difficult enough.
Featured Resources
How to Easily Create an Arbitrary Waveform Without Programming
Creating Arbitrary Waveforms Doesn’t Have to be Difficult
How to Effectively Manage Network Failures in Data Centers
At the core of data center issues is the network infrastructure, which can harbor problems either in its components or links.
Double Pulse Testing Power Semiconductor Devices with a 5/6 Series MSO with Built-in Arbitrary Function Generator
This application note is based on tests developed by Qorvo application engineering using a Tektronix 6 Series MSO.
PCI Express® Test Overview
PCl Express®, short for Peripheral Component Interconnect Express, is a high-performance and high-bandwidth serial communication interconnect standard.
Understanding and Improving Network Analyzer Dynamic Range
Achieving the highest possible network analyzer dynamic range is extremely important when characterizing many types of microwave devices, and in some cases, is the key factor in determining measurement performance.
EMI Compliance Test vs. EMI Pre-Compliance Test
Why do we need to measure EMI emissions? Electromagnetic interference (EMI) is caused by unintentional emissions from electronic equipment.
How to Characterize Low-Noise Amplifiers
System developers depend on low-noise amplifiers (LNAs) across various applications including wireless communications, sensor networks, navigation satellites and radio telescopes.
Performing Impedance Analysis with the E5061B ENA Vector Network Analyzer
Application Note: There are often times when you need to quickly check or evaluate the DC to RF performance of components and circuits which were previously analyzed with a dedicated impedance analyzer.
Featured Products
Offering more than 5,000 models of the latest technology from top manufactures. Our equipment always ships Field-Ready with the latest firmware and software, standard and nonstandard accessories, and required calibration.
